您的位置: 标准下载 » 国内标准 » 行业标准 »

FZ/T 97023-2009 缝编机

作者:标准资料网 时间:2024-05-21 21:41:23  浏览:8929   来源:标准资料网
下载地址: 点击此处下载
基本信息
标准名称:缝编机
英文名称:Stitch bonding machine
中标分类: 纺织 >> 纺织机械与器具 >> 针织、纺织制品机械与器具
ICS分类: 纺织和皮革技术 >> 纺织机械 >> 针织机械
发布部门:中华人民共和国工业和信息化部
发布日期:2010-01-20
实施日期:2010-06-01
首发日期:
作废日期:
主管部门:全国纺织机械与附件标准化技术委员会
提出单位:中国纺织工业协会
归口单位:全国纺织机械与附件标准化技术委员会
起草单位:常州市润源经编机械有限公司、中国纺织机械器材工业协会
起草人:刘志刚、黄骏、顾彩秀、王静怡、王占伟、李文卿
出版社:中国标准出版社
出版日期:2010-06-01
页数:12页
适用范围

本标准规定了缝编机的术语和定义、规格参数、要求、试验方法、检验规则及标志、包装、运输、贮存。
本标准适用于纤维网型、短切毡型、双短切毡型、全副衬纬型缝编机。

前言

没有内容

目录

没有内容

引用标准

下列文件中的条款通过本标准的引用而成为本标准的条款。凡是注日期的引用文件,其随后所有的修改单(不包括勘误的内容)或修订版均不适用于本标准。然而,鼓励根据本标准达成协议的各方研究是否可使用这些文件的最新版本。凡是不注日期的引用文件,其最新版本适用于本标准。
GB/T191 包装储运图示标志
GB5226.1-2002 机械安全 机械电气设备 第1部分:通用技术条件
GB/T7111.1 纺织机械噪声测试规范 第1部分:通用要求
GB/T7111.6 纺织机械噪声测试规范 第6部分:织造机械
FZ/T90001 纺织机械产品包装
FZ/T90074 纺织机械产品涂装
FZ/T90084 经编机用分段整经轴 术语及主要尺寸
FZ/T90089.1 纺织机械铭牌 型式、尺寸及技术要求
FZ/T90089.3 纺织机械铭牌 针织机械铭牌内容
JB/T7929-1999 齿轮传动装置清洁度

所属分类: 纺织 纺织机械与器具 针织 纺织制品机械与器具 纺织和皮革技术 纺织机械 针织机械
下载地址: 点击此处下载
基本信息
标准名称:单根纱线定捻效果的测定方法
中标分类: 纺织 >> 纺织综合 >> 基础标准与通用方法
替代情况:原标准号ZB W04001-1986
发布日期:
实施日期:1999-01-01
首发日期:
作废日期:2004-08-01
出版日期:
页数:4页
适用范围

没有内容

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 纺织 纺织综合 基础标准与通用方法
Product Code:SAE J792
Title:SAE Manual on Blast Cleaning
Issuing Committee:Surface Enhancement Committee
Scope: This reportl on blast cleaning is a companion to the SAE Manual on Shot Peening. It is intended to help engineers, management, and shop personnel to increase their knowledge of the process. The information contained herein has been submitted and edited by a group that has had extensive and varied experience with blast cleaning and whose recommendations merit consideration.
Rationale: This reportl on blast cleaning is a companion to the SAE Manual on Shot Peening. It is intended to help engineers, management, and shop personnel to increase their knowledge of the process. The information contained herein has been submitted and edited by a group that has had extensive and varied experience with blast cleaning and whose recommendations merit consideration.